PROCESS / INDUSTRIAL
OIL / GAS
The Flow Control Group manufacture a range of High performance knife gate valves
Knife Gate Valves are used for handling and controlling fluids with suspended solids, dirty liquids through to heavy slurries and sludge’s, often abrasive and corrosive.
Full bore, rubber seated, fully lugged, high pressure bi-directional Knife Gate Valve, suitable for end of line duty at fully rated pressure.
For use on sewage, slurries and waste water with high dried solids content.
Step blade arrangement for dual sealing
Pocketless orifices to prevent clogging
Maintainable gland arrangement and replaceable body seat
Ni-Hard insert available full or reduced bore
Available in a range of materials including SG iron, bronze, aluminium, carbon and stainless steel, duplex and Hastelloy.
Available as stainless steel, duplex and Hastelloy options.
‘Rising spindle’ design manufactured from stainless steel as standard.
Braided PTFE or other grade to suit application.
Aflas, Nitrile rubber, EPDM, Viton, PTFE or other to suit application.
Flange Alignment / Pressure Rating
BS EN1092 NP10, NP16, NP25, NP40, ANSI 150-300, BST ‘D’ or ‘E’.
Full bore machined and mechanically fixed Ni-Hard inserts available as an option.
Pneumatic, electric or manual.
These include extension spindles, non-rising spindles, locking facilities, Ni-Hard port inserts, electrical and mechanical position indication and solenoid valves.
Designs for higher pressure and other specialist applications are available upon request.
High Pressure Knife Gate Valves
Oil and Gas Division
Springwood Industrial Estate
Tel: 01376 321211